Digital Panel Meter (N24 Series)
Indicators of N24 series are destined for measurement of DC voltage or DC current, temperature from PT100 sensors and J, K thermocouples, AC voltage and AC current.
Product Overview
Indicators of N24 series are destined for measurement of DC voltage or DC current, temperature from PT100 sensors and J, K thermocouples, AC voltage and AC current.
Indicators of N24 series are designed for measurement
of DC voltage or DC current, temperature from PT100 sensors
and J, K thermocouples, AC voltage and AC current.
4-digit LED display, digits of 20 mm high,
Possible configuration of parameters through
the PD14 programmer and the free delivered eCon Software
Precision of displayed results (decimal point),
Measurement averaging time,
Recounting of indications (individual characteristic),
Automatic or manual compensation: temperature of
cold junction for measurements with thermocouples
or wire resistance for Pt100 sensors (N24T),
For more details please refer datasheet.
Technical Specifications
Indicators of N24 series are designed for measurement
of DC voltage or DC current, temperature from PT100 sensors
and J, K thermocouples, AC voltage and AC current.
4-digit LED display, digits of 20 mm high,
Possible configuration of parameters through
the PD14 programmer and the free delivered eCon Software
Precision of displayed results (decimal point),
Measurement averaging time,
Recounting of indications (individual characteristic),
Automatic or manual compensation: temperature of
cold junction for measurements with thermocouples
or wire resistance for Pt100 sensors (N24T),
For more details please refer datasheet.
Talk To Our Technical Experts
Related Products
Single Phase Power Supply (Rish Flex-e 17024A)
This features allows the use of a smaller size unit to power demanding loads such as motors, solenoid valves, lamps and other loads with transient overload behavior which would otherwise required an oversize power supply.
63A Direct Input Digital Meter (N27D)
Designed for measurement of RMS current and voltage (AC), active power and frequency.
Single Phase Power Supply (Rish Flex 9012A)
This is the default factory setting of all FLEX units. In case of short-circuit or overloading, the output current is interrupted. The device tries again to re-establish output voltage and normal condition about every 2 second till the problem is cleared.
Advanced Universal Input Digital Meter (N30U)
The N30U meter is destined for the measurement of temperature, resistance and standard signals